structure link history command
Syntax
- structure link history <name s > keyword
Primary keywords:
displacement-x displacement-y displacement-z displacement-rotational-x displacement-rotational-y displacement-rotational-z force-x force-y force-z moment-x moment-y moment-z
Samples relative displacement or force from a single degree-of-freedom in a structural element link.
If the optional name keyword is used, then the history can be supplied with a name to identify it later. If a name is not supplied, then one will be assigned automatically based on the internally created ID number of the history object.
The particular link must be identified either by coordinates (position v) or by ID (component-id i). In the case of coordinates, the closest available node to that location is found, and the link associated with that node is used.
- displacement-x [linkhistoryoptions]
relative displacement in the local x degree-of-freedom
- displacement-y [linkhistoryoptions]
relative displacement in the local y degree-of-freedom
- displacement-z [linkhistoryoptions]
relative displacement in the local z degree-of-freedom
- displacement-rotational-x [linkhistoryoptions]
relative angular displacement in the local x degree-of-freedom
- displacement-rotational-y [linkhistoryoptions]
relative angular displacement in the local y degree-of-freedom
- displacement-rotational-z [linkhistoryoptions]
relative angular displacement in the local z degree-of-freedom
- force-x [linkhistoryoptions]
force in the local x degree-of-freedom
- force-y [linkhistoryoptions]
force in the local y degree-of-freedom
- force-z [linkhistoryoptions]
force in the local z degree-of-freedom
- moment-x [linkhistoryoptions]
moment in the local x degree-of-freedom
- moment-y [linkhistoryoptions]
moment in the local y degree-of-freedom
- moment-z [linkhistoryoptions]
moment in the local z degree-of-freedom
Keyword Block
The following keywords are available to specify which link will be used to take a history.
displacement-rotational-x
,displacement-rotational-y
,displacement-rotational-z
,displacement-x
,displacement-y
,displacement-z
,force-x
,force-y
,force-z
,moment-x
,moment-y
andmoment-z
.- component-id i
the particular link is identified by the component ID number. If this keyword is used position should not be used.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |