Commands
Operate on global CFD settings.
CFD Commands
- cfd buoyancy
- Activate/deactivate buoyancy terms.
- cfd coupling
- Activate/deactivate PFC coupling.
- cfd cycling
- Set the PFC cycling status.
- cfd interval
- Specify the update interval.
- cfd list
- List the CFD settings.
- cfd porosity
- Set the porosity calculation mode.
- cfd read
- Read a fluid mesh or fluid property from files.
- cfd term
- Modify terms used in drag force calculations.
- cfd update
- Update the porosity, particle-applied force, and drag force.
Note
Several commands not documented in this section are described in the CCFD add-on documentation CCFD Add-on Commands. These commands were specific to the CCFD add-on.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |