element cfd history command
Syntax
- element cfd history <id i > keyword id i2 or v
Primary keywords:
density dragforce porosity presgradient pressure velocity viscosity xdragforce xpresgradient xvelocity ydragforce ypregradient yvelocity zdragforce zpresgradient zvelocity
Add an element CFD history.
A history is a floating point variable that can be sampled and stored during a model run. The optional i directly following history creates a history with the specified ID. If not specified, then the next available history ID is used. Following one of the keywords given below, either 1) a position vector or 2) an additional id keyword must be given to define the specific CCFD element. Review the common c history commands for details regarding the manipulation of histories.
- density
Fluid density.
- dragforce
Magnitude of the drag force.
- porosity
Fluid porosity.
- presgradient
Magnitude of the pressure gradient.
- pressure
Fluid pressure.
- velocity
Magnitude of the fluid velocity.
- viscosity
Fluid viscosity.
- xdragforce
The x-component of the drag force.
- xpresgradient
The x-component of the fluid pressure gradient.
- xvelocity
The x-component of the fluid velocity.
- ydragforce
The y-component of the drag force.
- ypregradient
The y-component of the fluid pressure gradient.
- yvelocity
The y-component of the fluid velocity.
- zdragforce
The z-component of the drag force.
- zpresgradient
The z-component of the fluid pressure gradient.
- zvelocity
The z-component of the fluid velocity.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |