rblock trace command
Syntax
- rblock trace <id id > id id2 or v
Add a rigid block particle trace. The positions and velocities of rigid blocks can be sampled and stored during a model run and the path through space can be visualized. The optional id directly following trace creates a particle trace with the specified ID. If not specified, then the next available particle trace ID is used. Following this, either 1) a position vector or 2) or an additional id keyword must be given to identify a specific rigid block. See the c trace commands for details regarding the manipulation of particle traces.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |