struct.link.model.tension

Syntax

m := struct.link.model.tension(p<,idof>)

struct.link.model.tension(p<,idof>) := m

Get/set the tensile yield force associated with the force-displacement model. Returns or assigns a 1x6 matrix representing the values in all degrees-of-freedom, or if the optional idof argument is specified, a single value in that degree-of-freedom.

The tensile yield force is a limit to how positive the force in the link can be. Note that tension is defined relative to the node-local coordinate system, and, thus, depending on the coordinate systems involved, the definition of compression and tension may not match those used by the element connected to the host node. See the struct.link.model.force function.

Returns:

m - a 6x1 matrix representing the values in all degrees-of-freedom, or a single value for a specific degree-of-freedom

Accepts:

m - a 6x1 matrix representing the values in all degrees-of-freedom, or a single value for a specific degree-of-freedom

Arguments:

p - a structural link pointer

idof - an optional argument indicating a specific degree of freedom, from 1 to 6