structure beam list
command
Syntax
- structure beam list keyword
Primary keywords:
apply force-end group information length force-node property system-local
List information about beam elements.
- apply
list applied distributed loads
- force-end
forces exerted by the end nodes on the element, in element local coordinates
- group <slot s >
list group to which the element belongs. By default, lists all slots with group assignments. If the slot keyword is used, only the contents of that slot is listed.
- information
lists general element information, including id and component-id numbers, connected nodes, centroids, surface area, volume, and the hide and select status
- length
list length of the element
- force-node keyword
list nodal forces. By default, components are displayed in terms of the element local coordinate systems. These are the forces exerted by the nodes on the element.
- local
list forces in terms of the element local coordinate system (the default)
- global
list forces in terms of the global coordinate system
- property keyword ...
list element property information
- density
density, \(ρ\)
- youngs
Young’s modulus, \(E\)
- poisson
Poisson’s ratio, \(ν\)
- plastic-moment
plastic moment, \(M^P\)
- thermal-expansion
thermal expansion coefficient, \(α_t\)
- cross-sectional-area
cross-sectional area, \(A\)
- moi-y
second moment with respect to local \(y\)-axis, \(I_y\)
- moi-z
second moment with respect to local \(z\)-axis, \(I_z\)
- moi-polar
polar moment of inertia, \(J\)
- direction-y
\(y\)-axis vector components
- system-local
the element local coordinate system
Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Feb 25, 2024 |