structure cable list

Syntax

structure cable list keyword

Primary keywords:

apply    force-axial    force-node    group    grout    information    length    property    stress    system-local    yield

List information about cables.

apply

list applied distributed loads

force-axial

axial forces exerted by the nodes on the element

force-node keyword

list nodal forces. By default, components are displayed in terms of the element local coordinate systems. These are the forces exerted by the nodes on the element.

local

list forces in terms of the element local coordinate system (the default)

global

list forces in terms of the global coordinate system

group <slot s >

list group to which the element belongs. By default, lists all slots with group assignments. If the slot keyword is used, only the contents of that slot is listed.

grout

shear stress in the grout

information

lists general element information, including id and component-id numbers, connected nodes, centroids, surface area, volume, and the hide and select status

length

list length of the element

property keyword ... <range>
density

density, \(ρ\)

youngs

Young’s modulus, \(E\)

poisson

Poisson’s ratio, \(ν\)

grout-cohesion

grout cohesive strength, \(c_g\)

grout-friction

grout friction angle, \(φ_g\)

grout-stiffness

grout stiffness, \(k_g\)

grout-perimeter

grout exposed perimeter, \(p_g\)

plastic-moment

plastic moment, \(M^P\)

slide

sliding flag

slide-tolerance

sliding tolerance

tensile-failure-strain

tensile failure strain (nondimensional)

thermal-expansion

thermal expansion coefficient, \(α_t\)

cross-sectional-area

cross-sectional area, \(A\)

yield-compression

compressive yield strength, \(F_c\)

yield-tension

tensile yield strength, \(F_t\)

stress

axial stress in the element

system-local

the element local coordinate system

yield

indicator of whether or not the element itself has yielded