This is the interface for ZoneThing, a class that holds extra data not in the fortran arrays. This will be stored in a container and the ID will be stored in offset $KZCPP in the fortran zone linked list. This inherits from Thing so we can use CellSpace. More...

#include <izonething.h>

Inheritance diagram for block::IZoneThing:

Public Member Functions
virtual const itasca::IThing *	getIThing () const =0
	Returns a const IThing pointer.

virtual itasca::IThing *	getIThing ()=0
	Returns a IThing pointer.

virtual FInt	getFortranOffset () const =0
	Return fortran offset. Necessary for gui queries.

virtual quint64	getZoneID () const =0
	Return the zone ID.

virtual bool	getBit (int bit) const =0

virtual void	setBit (int bit, bool b) const =0

virtual QVariant	getValue (int index) const =0

virtual void	setValue (int index, const QVariant &v) const =0
	Note - this is const through some hack so that we can use const ZoneThings when getting data. More...

virtual quint32	getNumVertices () const =0
	Returns the number of vertices used by the zone.

virtual quint32	getNumFaces () const =0
	Returns the number of faces used by the zone.

virtual const IVertexThing *	getVertexThing (qint32 index) const =0

virtual quint64	getVertexThingID (qint32 index) const =0

virtual FInt	getVertex (qint32 index) const =0

virtual quint32	getFaceSize (quint32 face) const =0

virtual const IVertexThing *	getFaceVertexThing (quint32 face, quint32 index) const =0

virtual quint32	getFaceVertexIndex (quint32 face, quint32 index) const =0

virtual DVect3	getFaceNormal (quint32 face) const =0

virtual DVect3	getFaceCentroid (quint32 face) const =0

virtual const IFaceThing *	getFaceThing (quint32 face) const =0
	Return 0 if not a block face. More...

virtual quint64	getFaceThingID (quint32 face) const =0

virtual const IZoneThing *	getJoin (quint32 face) const =0

virtual double	getDensity () const =0
	returns the zone density

virtual void	setDensity (double d)=0
	sets the density of the individual zone (not the material density)

virtual QString	getModelName () const =0
	Returns the name of the mechanical constitutive model present in the zone.

virtual void	setModelName (const QString &mname)=0
	Set constitutive modoel name.

virtual QStringList	getModelStates () const =0

virtual int	getState () const =0
	Returns the code for the plastic state.

virtual void	setState (int s)=0
	Sets the code for the plastic state.

virtual QString	getStateString () const =0
	Returns string associated with state.

virtual quint32	getPropertyIndex (const QString &sc) const =0

virtual QString	getPropertyName (quint32 index) const =0

virtual QStringList	getPropertyNames () const =0
	returns a list of all the valid properties of the current constitutive model assigned to this zone

virtual QVariant	getProperty (uint index) const =0

virtual QVariant	getProperty (const QString &propName) const =0

virtual void	setProperty (const QString &sprop, QVariant val)=0
	Set property sprop to value. Returns false if property not found.

virtual const QStringList	getThermProperties () const =0
	Returns the list of properties for the thermal model.

virtual quint32	getThermPropertyIndex (const QString &sc) const =0

virtual QVariant	getThermProperty (uint index) const =0

virtual QVariant	getThermProperty (const QString &propName) const =0

virtual bool	setThermProperty (const QString &sprop, QVariant value)=0
	Set thermal property sprop to value. Returns false if property not found.

virtual const QStringList	getFluidProperties () const =0
	Returns the list of properties for the matrix flow model.

virtual quint32	getFluidPropertyIndex (const QString &sc) const =0

virtual QVariant	getFluidProperty (uint index) const =0

virtual QVariant	getFluidProperty (const QString &propName) const =0

virtual bool	setFluidProperty (const QString &sprop, QVariant value)=0
	Set fluid property sprop to value. Returns false if property not found.

virtual double	getSpare () const =0
	Returns value of spare offset.

virtual SymTensor	getStress (bool bEffective) const =0
	Return zone stress.

virtual void	setStress (const SymTensor &st)=0
	Set the zone stress.

virtual double	getPP () const =0
	Return zone pore pressure (= average of gridpoint pore pressures)

virtual SymTensor	getStrainRate () const =0
	Return strain rate.

virtual SymTensor	getStrainIncrement () const =0
	Return strain increment.

virtual SymTensor	getRotStrainRate () const =0
	Return rotational strain rate.

virtual SymTensor	getRotStrainIncrement () const =0
	Return rotational strain increment.

virtual FInt	getBlock () const =0
	return fortran offset of host block

virtual IBlockThing *	getBlockThing () const =0
	Return host blockthing.

virtual quint64	getBlockThingID () const =0
	Return host blockthing id.

virtual double	getMass () const =0
	return zone mass

virtual int	getMaterialNumber () const =0
	return zone material number

virtual bool	isExcavated () const =0
	Returns total volumetric strain. More...

virtual bool	isRemoved () const =0
	Returns true if zone is in a block that is removed.

virtual bool	getHidden () const =0
	Returns true if zone or host block is hidden.

virtual double	getZoneVolume () const =0
	Returns zone volume.

virtual quint32	getOverlay () const =0
	Returns overlay number (0-3). Used in quad zoning.

virtual double	getMinEdgeLength () const =0
	Get minimum edge length.

virtual bool	checkGoodForFLAC3D () const =0
	Checks to ascertain if the tet volume will be adequate for FLAC3D.

virtual DVect3	getFluidDischarge () const =0
	Get the fluid discharge vector.

virtual DVect3	getThermalFlux () const =0
	Get thermal flow vector.

virtual double	getSxx () const =0
	Get xx component of stress.

virtual double	getSyy () const =0
	Get yy component of stress.

virtual double	getSzz () const =0
	Get zz component of stress.

virtual double	getSxy () const =0
	Get xy component of stress (=yx)

virtual double	getSxz () const =0
	Get xz component of stress (=zx)

virtual double	getSyz () const =0
	Get yz component of stress (=zy)

virtual void	setSxx (double s)=0
	Set xx component of stress.

virtual void	setSyy (double s)=0
	Set yy component of stress.

virtual void	setSzz (double s)=0
	Set zz component of stress.

virtual void	setSxy (double s)=0
	Set xy component of stress (=yx)

virtual void	setSxz (double s)=0
	Set xz component of stress (=zx)

virtual void	setSyz (double s)=0
	Set yz component of stress (=zy)

virtual double	getStressStrengthRatio (const SymTensor &s) const =0

virtual double	getZoneCondition (int i) const =0
	Returns the condition of zone geometry.

virtual DVect3	getDeformedPosition (bool active, double factor) const =0
	Return the position of the gridpoint with deformation exaggerated by factor if active is true.

virtual double	getSSI () const =0
	Return Shear Strain increment.

virtual double	getSSR () const =0
	Return Shear Strain rate increment.

virtual double	getVSI () const =0
	Return Volumetric Strain increment.

virtual double	getVSR () const =0
	Return Volumetric Strain rate increment.

virtual DVect3	getLocation () const =0
	Returns zone position.

Public Member Functions inherited from models::IGenericZone
virtual TType	getType () const =0
	Returns the actual type of the fully derived class represented by this object.

Static Public Attributes
static const FInt	cpp = 23
	offset to obtain pointer to zonething ID

static const TType	type_ = 0x4ede2fe7
	type used in IThing typing system

Static Public Attributes inherited from models::IGenericZone
static const TType	type_ = 0x4e13414f
	The type of IGenericZone, used in the alternate dynamic typing system based on IThing.

Detailed Description

This is the interface for ZoneThing, a class that holds extra data not in the fortran arrays. This will be stored in a container and the ID will be stored in offset $KZCPP in the fortran zone linked list. This inherits from Thing so we can use CellSpace.

Member Function Documentation

◆ getBit()

virtual bool block::IZoneThing::getBit ( int bit ) const

pure virtual

Returns the boolean stored in utility bit bit in the zone.

bit must be a bit index previouly returned from IZoneArray::claimBit().

◆ getFaceCentroid()

virtual DVect3 block::IZoneThing::getFaceCentroid ( quint32 face ) const

pure virtual

Returns the location of the centroid of face face in the global coordinate system.

Parameters

face	starts at 0, and must be lower than 4. This function is necessary because getFaceThing may return null if zone face is not a block face

◆ getFaceNormal()

virtual DVect3 block::IZoneThing::getFaceNormal ( quint32 face ) const

pure virtual

Returns the unit normal vector to face face.

Parameters

face	starts at 0, and must be lower than 4. This function is necessary because getFaceThing may return null if zone face is not a block face

◆ getFaceSize()

virtual quint32 block::IZoneThing::getFaceSize ( quint32 face ) const

pure virtual

Returns the number of gridpoints used by the face of index face.

Parameters

face	starts at 0, and must be lower than 4.

◆ getFaceThing()

virtual const IFaceThing* block::IZoneThing::getFaceThing ( quint32 face ) const

pure virtual

Return 0 if not a block face.

Get FaceThing for face face

Parameters

face	starts at 0, and must be lower than 4.

◆ getFaceThingID()

virtual quint64 block::IZoneThing::getFaceThingID ( quint32 face ) const

pure virtual

Get FaceThing ID for face face

Parameters

face	starts at 0, and must be lower than 4. Return 0 if not a block face

◆ getFaceVertexIndex()

virtual quint32 block::IZoneThing::getFaceVertexIndex	(	quint32	face,
		quint32	index
	)		const

pure virtual

Returns the index of the gridpoint on face face and vertex index.

Parameters

face	starts at 0, and must be lower than 4.
index	starts at 0, and must be lower than 3.

◆ getFaceVertexThing()

virtual const IVertexThing* block::IZoneThing::getFaceVertexThing	(	quint32	face,
		quint32	index
	)		const

pure virtual

Returns a const pointer to the gridpoint on face face and vertex index.

Parameters

face	starts at 0, and must be lower than 4.
index	starts at 0, and must be lower than 3 at the moment.

◆ getFluidProperty() [1/2]

virtual QVariant block::IZoneThing::getFluidProperty ( uint index ) const

pure virtual

Returns value of zone matrix flow property corresponding to index
Returns 0 if index is not valid

◆ getFluidProperty() [2/2]

virtual QVariant block::IZoneThing::getFluidProperty ( const QString & propName ) const

pure virtual

Returns value of zone matrix flow property corresponding to propName
Returns 0 if propName is not recognized

◆ getFluidPropertyIndex()

virtual quint32 block::IZoneThing::getFluidPropertyIndex ( const QString & sc ) const

pure virtual

Given a matrix flow property name, returns the index of the property assigned to this zone.

Note: Base 1, returns 0 if name is not found.

◆ getJoin()

virtual const IZoneThing* block::IZoneThing::getJoin ( quint32 face ) const

pure virtual

Returns a const pointer to the zone, IZoneThing, across face face.

Parameters

face	starts at 0, and must be lower than 4.

◆ getModelStates()

virtual QStringList block::IZoneThing::getModelStates ( ) const

pure virtual

Returns all possible states of the mechanical constitutive model present in the zone. Space delimited string

◆ getProperty() [1/2]

virtual QVariant block::IZoneThing::getProperty ( uint index ) const

pure virtual

Returns value of zone property corresponding to index
Returns 0 if index is not valid

◆ getProperty() [2/2]

virtual QVariant block::IZoneThing::getProperty ( const QString & propName ) const

pure virtual

Returns value of zone property corresponding to propName
Returns 0 if propName is not recognized

◆ getPropertyIndex()

virtual quint32 block::IZoneThing::getPropertyIndex ( const QString & sc ) const

pure virtual

Given a property name, returns the index of the property of the constitutive model assigned to this zone.

Note: Base 1, returns 0 if name is not found.

◆ getPropertyName()

virtual QString block::IZoneThing::getPropertyName ( quint32 index ) const

pure virtual

Given an index, returns the name of the property of the constitutive model assigned to this zone.

Note: Base 1, returns QString() if index is less then 1 or greater than the number of properties.

◆ getStressStrengthRatio()

virtual double block::IZoneThing::getStressStrengthRatio ( const SymTensor & s ) const

pure virtual

Returns the Stress to Strength ratio based on the current constitutive model properties and stress state s.
The Stress to Strength ratio is greater than or equal to 1.0. A value of 1.0 means that the zone is failing If the zone does not currently have any assigned constitutive model, or if the loaded constitutive model does not support this operation, then a default value of 10 is returned.

◆ getThermProperty() [1/2]

virtual QVariant block::IZoneThing::getThermProperty ( uint index ) const

pure virtual

Returns value of zone thermal property corresponding to index
Returns 0 if index is not valid

◆ getThermProperty() [2/2]

virtual QVariant block::IZoneThing::getThermProperty ( const QString & propName ) const

pure virtual

Returns value of zone thermal property corresponding to propName
Returns 0 if propName is not recognized

◆ getThermPropertyIndex()

virtual quint32 block::IZoneThing::getThermPropertyIndex ( const QString & sc ) const

pure virtual

Given a thermal property name, returns the index of the property assigned to this zone.

Note: Base 1, returns 0 if name is not found.

◆ getValue()

virtual QVariant block::IZoneThing::getValue ( int index ) const

pure virtual

Retrieves the value stored in the utility array at index.

index must be a value previously returned from IZoneArray::claimValue().

◆ getVertex()

virtual FInt block::IZoneThing::getVertex ( qint32 index ) const

pure virtual

Returns the fortran offset of the vertex with index index.

Parameters

index starts at 0, and must be lower than the number of gridpoint used by the zone, see getNumVertices()

◆ getVertexThing()

virtual const IVertexThing* block::IZoneThing::getVertexThing ( qint32 index ) const

pure virtual

Returns a const pointer to the vertex with index index.

Parameters

index starts at 0, and must be lower than the number of gridpoint used by the zone, see getNumVertices()

◆ getVertexThingID()

virtual quint64 block::IZoneThing::getVertexThingID ( qint32 index ) const

pure virtual

Returns the ID of the vertex with index index.

Parameters

index starts at 0, and must be lower than the number of gridpoint used by the zone, see getNumVertices()

◆ isExcavated()

virtual bool block::IZoneThing::isExcavated ( ) const

pure virtual

Returns total volumetric strain.

Returns true if zone is in a block marked as excavated

◆ setBit()

virtual void block::IZoneThing::setBit	(	int	bit,
		bool	b
	)		const

pure virtual

Sets the boolean stored in utility bit bit in the zone. This function is const, to indicate that setting bit values does not impact the calculation logic in any way.

bit must be a bit index previouly returned from IZoneArray::claimBit(). Note - this is const through some hack so that we can use const ZoneThings when getting data

◆ setValue()

virtual void block::IZoneThing::setValue	(	int	index,
		const QVariant &	v
	)		const

pure virtual

Note - this is const through some hack so that we can use const ZoneThings when getting data.

Sets the value stored in the utility array at index. This is const to indicate that these bit values do not modify the model in any way.

index must be a value previously returned from IZoneArray::claimValue().

The documentation for this class was generated from the following file:

C:/Source/itasca-suite/3dec/block/interface/izonething.h

Public Member Functions

Static Public Attributes

Detailed Description

Member Function Documentation

◆ getBit()

◆ getFaceCentroid()

◆ getFaceNormal()

◆ getFaceSize()

◆ getFaceThing()

◆ getFaceThingID()

◆ getFaceVertexIndex()

◆ getFaceVertexThing()

◆ getFluidProperty() [1/2]

◆ getFluidProperty() [2/2]

◆ getFluidPropertyIndex()

◆ getJoin()

◆ getModelStates()

◆ getProperty() [1/2]

◆ getProperty() [2/2]

◆ getPropertyIndex()

◆ getPropertyName()

◆ getStressStrengthRatio()

◆ getThermProperty() [1/2]

◆ getThermProperty() [2/2]

◆ getThermPropertyIndex()

◆ getValue()

◆ getVertex()

◆ getVertexThing()

◆ getVertexThingID()

◆ isExcavated()

◆ setBit()

◆ setValue()