Template

class itasca.dfn.template.Template

Objects of this type should not be created (instantiated) directly in Python. Use the module functions that return instances of this type.

dipdirmax() → float.

Get the template maximum dip direction in degrees.

dipdirmin() → float.

Get the template minimum dip direction in degrees.

dipmax() → float.

Get the template maximum dip in degrees.

dipmin() → float.

Get the template minimum dip in degrees.

id() → int.

Get the template id.

name() → string.

Get the template name.

norientparam() → int.

Get the template number of orientation parameters.

nposparam() → int.

Get the template number of position parameters.

nsizeparam() → int.

Get the template number of size parameters.

orientparam(index) → string or float.

Get a orientation parameter. The number of parameters can be assessed with the norientparam method.

orienttype() → string.

Get the template orientation type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped, fish, fisher (3D only) and dips (3D only).

posparam(index) → string or float.

Get a position parameter. The number of parameters can be assessed with the nposparam method.

postype() → string.

Get the template orientation type name. Acceptable values are uniform, gauss, bootstrapped and fish.

set_dipdirmax(value: float) → None.

Set the template maximum dip direction in degrees.

set_dipdirmin(value: float) → None.

Set the template minimum dip direction in degrees.

set_dipmax(value: float) → None.

Set the template maximum dip in degrees.

set_dipmin(value: float) → None.

Set the template minimum dip in degrees.

set_orientparam(index, parameter) → None.

Set an orientation parameter. The parameter can be either a string or a float depending on the parameter. The number of parameters can be assessed with the norientparam method.

set_orienttype(value: string) → None.

Set the template orientation type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped, fish, fisher (3D only) and dips (3D only).

set_posparam(index, parameter) → None.

Set a position parameter. The parameter can be either a string or a float depending on the parameter. The number of parameters can be assessed with the nposparam method.

set_postype(value: string) → None.

Set the template orientation type name. Acceptable values are uniform, gauss, bootstrapped and fish.

set_sizemax(value: float) → None.

Set the template maximum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.

set_sizemin(value: float) → None.

Set the template minimum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.

set_sizeparam(index, parameter) → None.

Set a size parameter. The parameter can be either a string or a float depending on the parameter. The number of parameters can be assessed with the nposparam method.

set_sizetype(value: string) → None.

Set the template size type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped and fish.

sizemax() → float.

Get the template maximum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.

sizemin() → float.

Get the template minimum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.

sizeparam(index) → string or float.

Get a size parameter. The number of parameters can be assessed with the nsizeparam method.

sizetype() → string.

Get the template size type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped and fish.