structure liner list command

Syntax

structure liner list keyword <range>

Primary keywords:

apply    coupling-normal    coupling-shear    force-node    group    information    model    property    system-local

List properties and responses of liner elements in the range. If no keyword is given, the default output of the command is that associated with the information keyword.

apply

uniform applied pressure acting on the element

coupling-normal

information about the normal coupling springs connecting the liner to the target object (zones in FLAC2D): normal displacement, stress, and normal direction. Normal displacement positive/negative implies separation/overlap; normal stress positive/negative implies tension/compression; and normal direction is given as a unit vector in the global system.

coupling-shear

information about the shear coupling springs connecting the liner to the target object (zones in FLAC2D): shear displacement, stress, yield state and shear direction. Shear displacement and stress are always positive and act in the liner tangent plane; and shear direction is given as a unit vector in the global system.

force-node <keyword>

generalized nodal forces (force and moment) acting on the element. These are the generalized forces exerted by the nodes on the element.

local

express the values in the element coordinate system (the default)

global

express the values in the global coordinate system

group <slot s >

group assignment(s). If slot is specified, then list the group assignment, if any, in slot s.

information

general element information: nodal connectivity, centroid, surface area, volume, and hide/select status

model

constitutive model

property keyword

The properties consist of constitutive model properties, beam-type properties, and coupling-spring properties. The constitutive model properties are listed by specifying the constitutive property name; these names are not listed here.

Beam-Type Properties

See Beam-Type Properties

Coupling-Spring Properties

coupling-cohesion-shear

shear coupling spring cohesion (stress units)

coupling-cohesion-shear-2

shear coupling spring cohesion (stress units) on side 2

coupling-cohesion-shear-residual

shear coupling spring residual cohesion (stress units)

coupling-cohesion-shear-residual-2

shear coupling spring residual cohesion (stress units) on side 2

coupling-friction-shear

shear coupling spring friction angle (degrees)

coupling-friction-shear-2

shear coupling spring friction angle (degrees) on side 2

coupling-stiffness-normal

coupling spring normal stiffness per unit area

coupling-stiffness-normal-2

coupling spring normal stiffness per unit area on side 2

coupling-stiffness-shear

coupling spring shear stiffness per unit area

coupling-stiffness-shear-2

coupling spring shear stiffness per unit area on side 2

coupling-yield-normal

normal coupling spring tensile strength (stress units)

coupling-yield-normal-2

normal coupling spring tensile strength (stress units) on side 2

effective

effective stress flag (default to on). If off, then pore pressures are not removed from the stress normal to the liner when determining shear failure limits.

slide

large-strain sliding flag

slide-tolerance

large-strain sliding tolerance

system-local

element local coordinate system