Commands

Operations on structural element liners are listed here.

2D liner elements use the same internal formulation as beam elements, except the Young’s modulus is scaled to reflect plane strain conditions. By default they are deformable, and connected on one side. They are assumed to be placed on a surface of the model, and, therefore, link interactions normal to the element surface are directional. They are unique in the structural element logic for the ability to support two links on each node, allowing liners to be embedded between two surfaces (using the embedded keyword during creation).

Structural Element Liner (2D) Commands

structure liner apply

structure liner cmodel

structure liner create

structure liner delete

structure liner gap-factor

structure liner group

structure liner hide

structure liner history

structure liner import

structure liner initialize

structure liner list

structure liner property

structure liner refine

structure liner select

• structure liner apply command
• structure liner cmodel command
• structure liner create command
• structure liner delete command
• structure liner gap-factor command
• structure liner group command
• structure liner hide command
• structure liner history command
• structure liner import command
• structure liner initialize command
• structure liner list command
• structure liner property command
• structure liner refine command
• structure liner select command