massflow drawpoint group command

Syntax

massflow drawpoint group s <keyword> <range>

Primary keywords:

remove    slot

Assign group name s to drawpoint in the range. Use of the group logic is described in Groups.

Both the group and the slot can be encoded into the single string s. To do this use the composition ‘slotname=groupname’, where the name to the left of the equals sign will be the slot, and the name to the right will be the group.

remove

Remove group s from the drawpoint. If no slot is specified the group assignment is removed from all slots it is found in.

slot s

Assign the group to the slot named s. The default slot is Default.