zone group
command
Syntax
- zone group s <keyword> <range>
Add group name s to the zones in the range. Use of the group logic is described in Groups. This command may take the form
zone group
"slotname=groupname" — quotation marks required, — where slotname is the slot assignment and groupname is the group name.A zone may belong to many groups in up to 128 different slots. The
group
range element can be used to select objects by group name.zone list group
can be used to identify existing zone group names.The following optional keywords are available.
- remove
Remove s from the zones. If a slot is not specified, the group name is removed from all slots where it is found.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |