zone nodal-mixed-discretization
command
Syntax
- zone nodal-mixed-discretization b
Activate or deactivate the nodal mixed discretization (nmd) feature. When nmd is
on
, any tetrahedral zones (3D) or triangular zones (2D) will use the nmd algorithm during stress calculations. When nmd isoff
, the default mixed discretization method will be used. See Grid Discretization in FLAC for further information.Note that nmd is
off
by default in FLAC3D, buton
by default in FLAC2D.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |