zone interface group
command
Syntax
- zone interface <s > group s <keyword> <range>
-
Add group name s to the interfaces in the range. Use of the group logic is described in Groups. This command may take the form
zone interface
"slotname = groupname" — quotation marks required, spaces at equals sign ignored — where slotname is the slot assignment and groupname is the group name.An interface may belong to many groups in different slots, up to a maximum of 128. The group range element can be used to select objects by group name.
If an interface name s is given the command is applied only to that interface, otherwise the command is applied to all interfaces in the optional range.
The following optional keywords are available:
- remove
Remove s from the interfaces. If a slot is not specified, the group name is removed from all slots it is found in.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |