zone.face.group.remove
Syntax
- i := zone.face.group.remove(z,iside,s<,slot>)
Note
- In the description below, the following correspondence is assumed between 3D and 2D analysis:
There is no 2D equivalence for 3D zone edges
3D zone faces (surfaces) <-> 2D zone edges (lines)
Removes the group name s from the face identified by z and iside in any slot where it is found. The removal of s will only occur in slot, if provided. The return value is 0 if the specified group is not assigned to that face.
- Returns:
- Arguments:
z - zone pointer
iside - index of the zone face, from 1 to 4 in 2D and from 1 to 6 in 3D
s - group name or index*
slot - slot name or index
Note
*Use the
group.find
andgroup.find.slot
intrinsics to obtain group and slot indices, respectively, and for further information.Use of the group logic is described in Groups.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |