zone.field.method.index
Syntax
- i := zone.field.method.index
- zone.field.method.index = i
Note
- In the description below, the following correspondence is assumed between 3D and 2D analysis:
3D volumes <-> 2D areas
Get/set the index number of the extrapolation method used for zone-based variables.
This has no effect on gridpoint-based variables. The indices corresponding to names are 0 = constant, 1 = volume-weighted averaging, 2 = inverse-distance-weighted averaging, and 3 = polynomial fit (3D ONLY). See
zone.field.method.name
. The default value is 0.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |