zone.area.deformed
Syntax
- f := zone.area.deformed(z) (2D ONLY)
Get the area of a zone using gridpoint positions that take into account accumulated gridpoint displacements.
This FISH intrinsic is meant to be used in a small-strain analysis when deformed zone areas are required. This FISH intrinsic should not be used in a large-strain analysis (an incorrect area will be returned). Use the intrinsic
zone.area
in large-strain mode.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |