zone.model.init
Syntax
- i := zone.model.init(z)
Initializes all constitutive models (mechanical, fluid, and thermal) assigned to the zone. This recalculates intermediate values based on the current properties. This may be necessary if property values are changed during cycling.
Note that mechanical constitutive models should recalculate intermediate stored values automatically when properties change.
This does not perform an update of values depending on stiffness or density; see the
zone.force.update
intrinsic.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |