zone.temp
Syntax
- f := zone.temp(z)
- zone.temp(z) := f
Get/set the zone temperature. Normally this is the average temperature of the gridpoints. If the
zone thermal zone-based-temperature
command was used, then temperatures are stored and retrieved directly from the zone.- Returns:
f - the average zone temperature
- Accepts:
f - the temperature to store in the zone; only valid if
zone thermal zone-based-temperature
has been set to true- Arguments:
z - a zone pointer
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |