zone.vol.deformed
Syntax
- f := zone.vol.deformed(z) (3D ONLY)
Get the volume (in 3D) or area (in 2D) of a zone using gridpoint positions that take into account accumulated gridpoint displacements.
This FISH intrinsic is meant to be used in a small-strain analysis when deformed zone volumes are required. This FISH intrinsic should not be used in a large-strain analysis (an incorrect volume (area) will be returned). Use the intrinsic
zone.vol
in large-strain mode.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |