building-blocks point drape command

Syntax

building-blocks point drape keyword <novalidate> <range>

Move points onto an external geometric set. The points to be moved are defined by the <range>. Movement of each point is done along the beam-line defined by keyword until it intersects the external geometric set. The <novalidate> option skips validation of all blocks moved as part of the drape operation.

inwards v

Extend the beam-line from each point to the focus point v.

outwards v

Extend the beam-line from the focus point v to each point.

direction v

Set the beam-line as a constant direction vector v.