zone face apply-remove command

Syntax

zone face apply-remove <keyword> <range>

Note

• The following nomenclature / equivalence between FLAC3D and FLAC2D is used:

  • Zone faces = zone surface faces in 3D or zone edges (lines connecting gridpoints) in 2D

  • There is no 2D equivalence for 3D zone edges

Remove zone face apply conditions, which are described in the documentation for that command. If an optional range is supplied, the condition is removed only from those faces within the range. If no keyword is specified, then all conditions applied to the specified faces are removed.

acceleration

acceleration-dip (3D ONLY)

acceleration-local

acceleration-normal

acceleration-strike (3D ONLY)

acceleration-tangential (2D ONLY)

acceleration-x

acceleration-y

acceleration-z (3D ONLY)

convection

discharge

flux

head

leakage

pore-pressure

quiet

quiet-dip (3D ONLY)

quiet-normal

quiet-strike (3D ONLY)

quiet-tangential (2D ONLY)

reaction

reaction-dip (3D ONLY)

reaction-local

reaction-normal

reaction-strike (3D ONLY)

reaction-tangential (2D ONLY)

reaction-x

reaction-y

reaction-z (3D ONLY)

stress-dip (3D ONLY)

stress-normal

stress-strike (3D ONLY)

stress-tangential (2D ONLY)

stress-xx

stress-xy

stress-xz (3D ONLY)

stress-yy

stress-xz (3D ONLY)

stress-zz (3D ONLY)

temperature

velocity

velocity-dip (3D ONLY)

velocity-local

velocity-normal

velocity-strike (3D ONLY)

velocity-tangential (2D ONLY)

velocity-x

velocity-y

velocity-z (3D ONLY)