extrude.set.zone.autodir
Syntax
- i = extrude.set.zone.autodir(sp)
- extrude.set.zone.target.autodir(sp) = i
Get/set the flag for auto-zoning direction. See the lkwd:\(direction\) keyword of
extrude set automatic-zone
. Possible return/assignment values are: 0 = all (both directions); 1 = x,y (construction direction); 2 - normal (extrusion direction).Returns: i - integer Accepts: i - integer Arguments: sp - extrude set pointer
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |