gp.ratio.target
Syntax
- f = gp.ratio.target(gp)
- gp.ratio.target(gp) = f
Get/set the target local gridpoint mechanical convergence ratio. The default value is 1e-4. A local force ratio (
gp.ratio
) below this value is considered converged. Seegp.convergence
.Returns: f - gridpoint target mechanical convergence ratio Accepts: f - gridpoint target mechanical convergence ratio Arguments: gp - a zone gridpoint pointer
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |