zone.condition
Syntax
- f = zone.condition(z<,i>)
Get the zone condition number. This is a general value indicating how geometrically well formed the zone is. A value of 1.0 indicates a perfect cubical zone. A value of 0.0 indicates an unusable zone.
Returns: f - zone condition value
Arguments: z - zone pointer
i - which condition type.
if i = 0 (default), the minimum measurement of aspect ratio, volume ratio and orthogonality;
if i = 1, the measurement of aspect ratio,
zone.condition
(z, 1) =zone.aspect
(z);if i = 2, the measurement of volume ratio;
if i = 3, the measurement of orthogonality,
zone.condition
(z, 3) =zone.ortho
(z).See
zone geometry-test
for more explanations.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |