zone.creep.timestep
Syntax
- f = zone.creep.timestep()
- zone.creep.timestep() = f
Get/set the timestep used by the zone creep module when it is active. This may not be the timestep used, as other active modules may require a smaller timestep.
Returns: f - the current zone creep module timestep Accepts: f - sets the current zone creep module timestep. This does not change any active automatic timestep calculations that may be active.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |