block gridpoint apply-remove
command
Syntax
- block gridpoint apply-remove keyword <range>
Primary keywords:
force force-x force-y force-z quiet quiet-x quiet-y quiet-z velocity-normal velocity-x velocity-y velocity-z viscous viscous-x viscous-y viscous-z reaction reaction-x reaction-y reaction-z source temperature verbose
Remove a boundary condition from block gridpoints.
- force
Remove a force boundary condition in the \(x\)-, \(y\)-, and \(z\)-directions.
- force-x
Remove a force boundary condition in the \(x\)-direction.
- force-y
Remove a force boundary condition in the \(y\)-direction.
- force-z
Remove a force boundary condition in the \(z\)-direction.
- quiet
Synonym for Viscous
- quiet-x <keyword ...>
Synonym for Viscous-X.
- quiet-y <keyword ...>
Synonym for Viscous-Y.
- quiet-z <keyword ...>
Synonym for Viscous-Z
- velocity-normal
Remove a velocity boundary condition in the normal direction.
- velocity-x f
Remove a velocity boundary condition in the \(x\)-direction.
- velocity-y f
Remove a velocity boundary condition in the \(y\)-direction.
- velocity-z f
Remove a velocity boundary condition in the \(z\)-direction.
- viscous
Remove a viscous boundary condition in the \(x\)-, \(y\)-, and \(z\)-directions.
- viscous-x f
Remove a viscous boundary condition in the \(x\)-direction.
- viscous-y f
Remove a viscous boundary condition in the \(y\)-direction.
- viscous-z f
Remove a viscous boundary condition in the \(z\)-direction.
- reaction
Remove a reaction boundary condition in the \(x\)-, \(y\)-, and \(z\)-directions.
- reaction-x
Remove a reaction boundary condition in the \(x\)-direction.
- reaction-y
Remove a reaction boundary condition in the \(y\)-direction.
- reaction-z
Remove a reaction boundary condition in the \(z\)-direction.
- source f
Remove a heat-generating point source boundary condition.
- temperature f
Remove a fixed temperature boundary condition.
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |