block.subcontact.disp.shear.max
Syntax
- f = block.subcontact.disp.shear.max(bscp)
- block.subcontact.disp.shear.max(bscp) = f
Get/set the maximum shear displacement magnitude at any point in the past. This is set to 0 with a
block contact reset displacement
command.Returns: f - maximum shear displacement magnitude Accepts: f - maximum shear displacement magnitude Arguments: bscp - block subcontact pointer
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |