block.subcontact.state.string
Syntax
- s = block.subcontact.state.string(bscp)
Get the subcontact state indicator as a string
Different joint constitutive models will have different potential states (see Constitutive Models in 3DEC). The potential states for the Mohr-Coulomb model are shown in the table below.
Combinations of states are possible. For example, a subcontact that failed in tension in the past and is shearing now would have a state string value of stension-p shear-n. A value of snone indicates no failure (elastic).
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |