sel reinforcement property command

Syntax

sel reinforcement property i keyword ...

Primary keywords:

active-half-length    rupture-axial-strain    rupture-shear-strain    rupture-tension-strain    stiffness-axial    stiffness-shear    yield-shear-force    yield-tension-force

Assign property values to reinforcement property \(i\).

active-half-length f

Active half length.

rupture-axial-strain f

Axial rupture strain. If axial strain exceeds this value, the element will no longer carry axial load.

rupture-shear-strain f

Shear rupture strain. If shear strain exceeds this value, the element will no longer carry shear load.

rupture-tension-strain f

Rupture tension strain.

stiffness-axial f

Axial stiffness {F/L]

stiffness-shear f

Shear stiffness [F/L]

yield-shear-force f

Ultimate shear capacity [F]. The element cannot sustain shear forces greater than \(f\).

yield-tension-force f

Ultimate axial capacity [F]. The element cannot sustain axial forces greater than \(f\).