FISH Functions
FISH functions operating on extrusion piles. The type specifiers used in the FISH function signatures are given in the FISH Type Index section.
Note that all beam functions may also be used on pile elements.
Structural Pile Functions
| struct.pile.area(STRUCT_PILE_PNT) |
| struct.pile.force(STRUCT_PILE_PNT,INT) |
| struct.pile.gap(STRUCT_PILE_PNT,INT,INT) |
| struct.pile.length(STRUCT_PILE_PNT) |
| struct.pile.load(STRUCT_PILE_PNT) |
| struct.pile.moi(STRUCT_PILE_PNT) |
| struct.pile.moment(STRUCT_PILE_PNT,INT) |
| struct.pile.moment.plastic(STRUCT_PILE_PNT) |
| struct.pile.normal.cohesion(STRUCT_PILE_PNT) |
| struct.pile.normal.dir(STRUCT_PILE_PNT,INT) |
| struct.pile.normal.disp(STRUCT_PILE_PNT,INT) |
| struct.pile.normal.friction(STRUCT_PILE_PNT) |
| struct.pile.normal.gap(STRUCT_PILE_PNT) |
| struct.pile.normal.state(STRUCT_PILE_PNT,INT) |
| struct.pile.normal.stiffness(STRUCT_PILE_PNT) |
| struct.pile.normal.stress(STRUCT_PILE_PNT,INT) |
| struct.pile.perimeter(STRUCT_PILE_PNT) |
| struct.pile.poisson(STRUCT_PILE_PNT) |
| struct.pile.rockbolt(STRUCT_PILE_PNT) |
| struct.pile.rupture.tension(STRUCT_PILE_PNT) |
| struct.pile.shear.cohesion(STRUCT_PILE_PNT) |
| struct.pile.shear.dir(STRUCT_PILE_PNT,INT) |
| struct.pile.shear.disp(STRUCT_PILE_PNT,INT) |
| struct.pile.shear.flag(STRUCT_PILE_PNT) |
| struct.pile.shear.friction(STRUCT_PILE_PNT) |
| struct.pile.shear.state(STRUCT_PILE_PNT,INT) |
| struct.pile.shear.stiffness(STRUCT_PILE_PNT) |
| struct.pile.shear.stress(STRUCT_PILE_PNT,INT) |
| struct.pile.slide(STRUCT_PILE_PNT) |
| struct.pile.slide.tol(STRUCT_PILE_PNT) |
| struct.pile.state.compression(STRUCT_PILE_PNT) |
| struct.pile.state.tension(STRUCT_PILE_PNT) |
| struct.pile.strain.failure(STRUCT_PILE_PNT) |
| struct.pile.stress.confining(STRUCT_PILE_PNT,INT) |
| struct.pile.table.cohesion(STRUCT_PILE_PNT) |
| struct.pile.table.factor(STRUCT_PILE_PNT) |
| struct.pile.table.friction(STRUCT_PILE_PNT) |
| struct.pile.volume(STRUCT_PILE_PNT) |
| struct.pile.ydir(STRUCT_PILE_PNT) |
| struct.pile.yield.compression(STRUCT_PILE_PNT) |
| struct.pile.yield.tension(STRUCT_PILE_PNT) |
| struct.pile.young(STRUCT_PILE_PNT) |
