extrude.edge.grid.ratio.isolate
Syntax
- i := extrude.edge.grid.ratio.isolate(ep)
- extrude.edge.grid.ratio.isolate(ep) := i
The option only applies to the edges which form regular (3- or 4-sided) blocks.
Get/set the ratio-isolate flag. The flag has two possible values: 0 = false (propagation), 1 = true (no propagation). See
extrude edge ratio-isolate
.Returns: i - integer Accepts: i - integer Arguments: ep - edge pointer
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |