extrude.set.block.create
Syntax
- bp := extrude.set.block.create(sp,i1,i2,i3<,i4>)
Create a block from points with ID i1, i2, i3, etc. Minimum 3 points are required. For irregular blocks, only points on the external boundary have to be specified (internal boundaries are detected automatically). Points may be provided in any order.
Returns: bp - block pointer
Arguments: sp - extrude set pointer
i1 - first point ID (alternately, point pointer)
i2 - second point ID (alternately, point pointer)
i3 - third point ID (alternately, point pointer)
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |