extrude.set.zone.autodir
Syntax
- i := extrude.set.zone.autodir(sp)
- extrude.set.zone.target.autodir(sp) := i
The function only applies to 3D case (when 3D zones are generated from the Extruder).
Get/set the flag for auto-zoning direction. Possible return/assignment values are: 0 = all (both directions); 1 = x,y (construction direction); 2 - normal (extrusion direction).
Returns: i - integer Accepts: i - integer Arguments: sp - extrude set pointer
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |