zone interface element
command
Syntax
- zone interface <s > element keyword <range>
Primary keywords:
Manage zone interface elements. If the interface name is not given then the command operates on all interfaces.
If an interface name s is given the command is applied only to elements of that interface, otherwise the command is applied to elements in all interfaces in the optional range.
- delete
All interface elements associated with this interface within the selected range are deleted.
- extra i a[interfaceelementblock]
sets the extra interface element variable value for array index i. The standard [interfaceelementblock] list is available to modify this value in space.
- group s <keyword>
Add group name s to the interface elements in the range. Use of the group logic is described in Groups. This command may take the form
zone interface element
"slotname = groupname" — quotation marks required, spaces at equals sign ignored — where slotname is the slot assignment and groupname is the group name.An interface element may belong to many groups in different slots, up to a maximum of 128. The group range element can be used to select objects by group name.
The following optional keywords are available:
- remove
Remove s from interface elements. If a slot is not specified, the group name is removed from all slots it is found in.
- list keyword
-
- information
Nodes, area and normal vector of all elements in the range are displayed.
zone interface element
Keyword Block
The following keywords may be used to modify a supplied value. If the description of the modifier keyword mentions what type of value it may be applied to (e.g. scalar value, vector value, etc.), be sure there is a match between the modifier and the main keyword value. The commands main keywords are: extra
.
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |