structure cable list
Syntax
- structure cable list keyword
Primary keywords:
apply force-axial force-node group grout information length property stress system-local yield
List information about cables.
- apply
list applied distributed loads
- force-axial
axial forces exerted by the nodes on the element
- force-node keyword
list nodal forces. By default, components are displayed in terms of the element local coordinate systems. These are the forces exerted by the nodes on the element.
- local
list forces in terms of the element local coordinate system (the default)
- global
list forces in terms of the global coordinate system
- group <slot s >
list group to which the element belongs. By default, lists all slots with group assignments. If the slot keyword is used, only the contents of that slot is listed.
- grout
shear stress in the grout
- information
lists general element information, including id and component-id numbers, connected nodes, centroids, surface area, volume, and the hide and select status
- length
list length of the element
- property keyword ... <range>
- density
density, ρ
- youngs
Young’s modulus, E
- poisson
Poisson’s ratio, ν
- grout-cohesion
grout cohesive strength, cg
- grout-friction
grout friction angle, φg
- grout-stiffness
grout stiffness, kg
- grout-perimeter
grout exposed perimeter, pg
- plastic-moment
plastic moment, MP
- slide
sliding flag
- slide-tolerance
sliding tolerance
- tensile-failure-strain
tensile failure strain (nondimensional)
- thermal-expansion
thermal expansion coefficient, αt
- cross-sectional-area
cross-sectional area, A
- yield-compression
compressive yield strength, Fc
- yield-tension
tensile yield strength, Ft
- stress
axial stress in the element
- system-local
the element local coordinate system
- yield
indicator of whether or not the element itself has yielded
Was this helpful? ... | 3DEC © 2019, Itasca | Updated: Feb 25, 2024 |