Logo  

Verification and Example Problems

Several examples are presented to validate and demonstrate the creep models in FLAC3D. The data files for these examples are contained in the “\Datafiles\Creep” directory.

  • Maxwell/Kelvin/Burgers Model: Parallel-Plate Viscometer
  • WIPP-Type Models: Parallel-Plate Viscometer
  • Power Model: Cylindrical Cavity
  • Power-Mohr Model: Cylindrical Cavity
  • WIPP Model: Cylindrical Cavity
  • Power Model: Spherical Cavity
  • Maxwell Model: Oedometer Test
  • Kelvin Model: Oedometer Test
  • Maxwell/Burgers Model: Compression Test
  • Burgers-Mohr/Power-Mohr Model: Loading/Unloading Compression Test
  • WIPP-Drucker Model: Comparison with Drucker-Prager Model
  • WIPP-Drucker Model: Compression Test Showing Localization
  • WIPP-Salt Model: Hydrostatic Compression Test
  • WIPP-Salt Model: Shear Compression Test
  • Soft-Soil-Creep Model: Triaxial Consolidated Undrained Loading
⇄
  • FLAC3D 7.0 documentation »
  • Program Guide »
  • Constitutive Models »
  • Creep Constitutive Models in 3DEC and FLAC3D »


⇐ Input Instructions for Creep Modeling | Maxwell/Kelvin/Burgers Model: Parallel-Plate Viscometer ⇒
Was this helpful? ... FLAC3D © 2019, Itasca Updated: Mar 10, 2023