block gridpoint list
command
Syntax
- block gridpoint list keyword <range>
Primary keywords:
density-scaling-factors displacement force join mass pore-pressure position apply stress temperature thermal velocity group extra
List information about gridpoints.
- density-scaling-factors
List gridpoint density scaling factors.
- displacement
List gridpoint displacements.
- force
List gridpoint unbalanced forces.
- join
List joined gridpoints.
- mass
List gridpoint location, mass and block linkage.
- pore-pressure
List gridpoint pore pressure.
- position
List gridpoint position in model coordinates.
- apply keyword
List information about boundary conditions, according to the following keywords.
- added-mass
Dynamic added masses
- displacement
List displacement at boundary.
- free-field
Dynamic free field information
- force
List forces at boundary.
- reactions keyword
- forces
List reaction forces at any gridpoint with a fixed velocity.
- tractions
List reactions at fixed velocity points in the form of average tractions on the surrounding faces.
- state
List boundary condition state specified by boundary code ix, iy, iz.
0 free 1 stress (or force) 2 viscous 3 velocity
- summary
List total of forces applied on the \(x\)-, \(y\)- and \(z\)-boundaries.
- velocity
List velocities applied to boundary
- stress
List gridpoint stresses (only for high-order elements).
- temperature
List gridpoint temperatures.
- thermal
List gridpoint thermal mass, temperature state, temperature change and heat.
- velocity
List gridpoint velocities.
- group
List gridpoint group names.
- extra i
List gridpoint extra variable information.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Oct 31, 2024 |