zone select
command
Syntax
- zone select <keyword> <range>
-
Select or de-select all zones in the range. Selected objects can be specified in a range filter by using the
selected
keyword. Objects that are not selected can be specified in a range filter by using thedeselected
keyword.The following keywords are available.
- b
When specified,
on
selects all zones in the range.off
de-selects all zones in the range.on
is the default if no keyword is given.
- new
Implies
on
. This will select zones in the range, and automatically de-select any currently selected zones that are not in the range.
- undo
This will reverse the operation of the last
zone select
command. FLAC keeps a maximum undo stack of size 12.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |