`system`

command

Syntax

- sketch set system keyword ...
Primary keywords:

Set the coordinate system. These settings affect how extruded object coordinates (u,v,n) map to global coordinates (\(x,y,z\)). Object coordinate (n) and global coordinate (\(z\)) are 3D only.

- normal-axis v (3D only)
Set the normal axis v (3D vector). This is the direction of extrusion (perpendicular to 2D local \(x\), \(y\)).

- origin v
Set the origin of the extrusion transformation v (2D or 3D vector). If extruded (FLAC3D), the 2D extrusion coordinate (0,0) is mapped to (\(x,y,z\)) before being rotated into the

*u,v,n*coordinate system.

Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Sep 26, 2024 |