zone gridpoint group command
Syntax
- zone gridpoint group s <keyword> <range>
-
Assign group name s to zone gridpoints in the range. Use of the group logic is described in Group.
Both the group and the slot can be encoded into the single string s. To do this use the composition ‘slotname=groupname’, where the name to the left of the equals sign will be the slot, and the name to the right will be the group.
- remove
Remove group s from the gridpoint. If no slot is specified the group assignment is removed from all slots it is found in.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |