Commands
Operate on zones.
Please see the Formulation of a 3D Explicit Finite Difference Model section for a detailed description of FLAC3D zones and their implementation and structure.
Zone elements are connected through gridpoints.
Zones can interact across surfaces with the interface logic using interface nodes and elements.
Zone faces can be used to track and name zone surfaces. It is important to note that there is no actual separate zone face data structure. Zone faces are simply associations made with the boundaries of individual zones. As such zone faces do not have a unique id number, but are instead identified by either a zone ID number and side number pair, or by a list of gridpoint ID numbers.
Zone commands
Zone Face commands
zone face apply | |
zone face apply-remove | |
zone face group | |
zone face hide | |
zone face list | |
zone face select | |
zone face skin | |
zone face westergaard | |
zone face westergaard-remove |
Zone Gridpoint commands
Zone Interface commands
zone interface create | |
zone interface effective | |
zone interface element | |
zone interface list | |
zone interface node | |
zone interface permeability | |
zone interface tolerance-contact |
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |