clump scale command
Syntax
- clump scale keyword ... <range>
-
Scale clumps. The pebbles are scaled, their positions are modified, and the volume is updated. If the volume or moment of inertia has been previously specified by the user either via the
clump attribute
command or via FISH, the principal moments of inertia are in a fixed state and will not be scaled. This can be modified with FISH (see theclump.moi.fix
intrinsic for further details). One can either scale the volume to a target value, the volume to the volume of an equivalent {disk with unit thickness in 2D; sphere in 3D} with a specified diameter, or via the return value of a FISH function. This operation may fail if a clump is scaled so that any of its pebbles fall outside of the model domain. If this happens for any clump, then no clumps are scaled.- diameter fdiam
Scale the clump to have volume of an equivalent {disk with unit thickness in 2D; sphere in 3D} with a specified diameter.
Usage Example
Please see the clump template
example for a demonstration of the clump scale
command.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |