block zone property
command
Syntax
- block zone property <density f > keyword ... <range>
Make a constitutive model(s) property assignment. Properties are name value pairs where the name is the keyword given in the command and the value type is specific to the property.
Models and Properties
The special
density
keyword can be given as well, assigning density to zones; this is not a constitutive model property but stored within the zone class.All constitutive models have properties associated with them.
There are 19 basic mechanical constitutive models in 3DEC and 11 option-specific mechanical models. All are classified as follows: elastic, elastic-plastic, dynamic, creep, thermal.
Elastic Mechanical Models
Anisotropic
The anisotropic (transversely-elastic) model: properties, description.
Elastic
The isotropic elastic model: properties, description.
Othortropic
The orthotropic elastic model: properties, description.
Elastic-Plastic Mechanical Models
Cap-Yield
The cap-yield (CYSoil) model: properties, description.
Double-Yield
The double-yield model: properties, description.
Drucker-Prager
The Drucker-Prager model: properties, description.
Hoek-Brown
The Hoek-Brown model: properties, description.
Hoek-Brown-PAC
The Hoek-Brown-PAC model: properties, description.
Modified-Cam-Clay
The modified Cam-Clay model: properties, description.
Mohr-Coulomb
The Morh-Coulomb model: properties, description.
Mohr-Coulomb-Tension
The Mohr-Coulomb tension (MorhT) model: properties, description.
Plastic-Hardening
The plastic hardening model: properties, description.
Cap-Yield-Simplified
The simplified Cap-Yield (CHSoil) model: properties, description.
Softening-Ubiquitous
The bilinear strain-softening/hardening ubiquitous-joint model: properties, description.
Strain-Softening
The strain-softening/hardening Mohr-Coulomb model: properties, description.
Swell
The swell model: properties, description.
Ubiquitous-Joint
The ubiquitous-joint model: properties, description.
Ubiquitous-Anisotropic
The anisotropic-elasticity ubiquitous-joint model: properties, description.
Dynamic Option Model
Finn
The Finn model: properties, description.
Creep Option Models
Burgers
The Burgers model: properties, description.
Burgers-Mohr
The Burgers-Mohr model: properties, description.
Maxwell
The Maxwell (classic viscoplastic) model: properties, description.
Power
The power model: properties, description.
Power-Mohr
The power-Mohr model: properties, description.
Power-Ubiquitous
The power-ubiquitous model: properties, description.
WIPP
The WIPP model: properties, description.
WIPP-Drucker
The WIPP-Drucker model: properties, description.
WIPP-Salt
The WIPP-salt model: properties, description.
Thermal Option Model
Hydration-Drucker-Prager
The Hydration-Drucker-Prager model: properties, description.
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |