block zone thermal
command
Syntax
- block zone thermal keyword <range>
Set the thermal properties of the block zone constitutive model.
- property keyword ...
- conductivity f
Set thermal conductivity (isotropic).
- conductivity-x f
Set thermal conductivity in x direction for anistropic conductivity.
- conductivity-y f
Set thermal conductivity in y direction for anistropic conductivity.
- conductivity-z f
Set thermal conductivity in z direction for anistropic conductivity.
- specific-heat f
Set specific heat.
- expansion f
Set thermal expansion coefficient.
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |