structure hybrid property
Syntax
- structure hybrid property keyword ... <range>
Primary keywords:
cross-sectional-area density dowel-active-length dowel-failure-strain dowel-stiffness dowel-yield grout-cohesion grout-friction grout-perimeter grout-stiffness slide slide-tolerance tensile-failure-strain thermal-expansion yield-compression yield-tension young
Assigns properties to hybrid bolt elements in the range. Refer to Hybrid Properties for a detailed description of the properties. The following properties are available.
- cross-sectional-area f
cross-sectional area
- density f
mass density
- dowel-active-length f
Active length of dowel segments [L]
- dowel-failure-strain f
Dowel shear strain limit [-]
- dowel-stiffness f
Dowel shear stiffness [F/L]
- dowel-yield f
Dowel shear yield strength [F]
- grout-cohesion , f
grout cohesion (force units) per unit length
- grout-friction f
grout friction angle
- grout-perimeter f
grout exposed perimeter
- grout-stiffness f
grout stiffness per unit length
- slide b
large-strain sliding flag
- slide-tolerance f
large-strain sliding tolerance
- tensile-failure-strain f
tensile failure strain
- thermal-expansion f
thermal expansion coefficient
- yield-compression f
compressive yield strength
- yield-tension f
tensile yield strength
- young f
Young’s modulus
Was this helpful? ... | PFC © 2021, Itasca | Updated: Feb 25, 2024 |