`block contact compute`

command

Syntax

- block contact compute keyword <range>
Primary keywords:

average-trace-length center-density mass-density p10 p20 p21 p30 p32 p33 trace-center-density trace-mass-density percolation

Compute joint statistics. Various density measures of fractures, filtered by range, can be computed.

- average-trace-length keyword
Return the average trace length (trace length divided by number of traces), where traces are the intersections between the fractures and the input planar geometry set.

- center-density keyword
Synonym for kwd:\(P30\).

- mass-density
Synonym for kwd:\(P32\).

- p10 keyword
Return the P10 (number of fracture per unit length of measurement) along the line defined by begin and end, or along the geometry edges defined with the geometry keyword.

- geometry s
P10 is measured along the edges of the geometry set with name s. Cannot be given with the begin or end keywords.

- begin v
Define the starting point of the reference line where P10 is measured. Cannot be given with the geometry keyword.

- end v
Define the ending point of the reference line where P10 is measured. Cannot be given with the geometry keyword.

- p20 keyword
Return the P20 (number of fracture per unit area of measurement) on the geometry defined with the geometry keyword.

- p21 keyword
Return the P21 (length of fracture per unit area of measurement) on the geometry defined with the geometry keyword.

- p30 keyword
Return the P30 (number of fracture per unit volume of measurement) inside the specified box.

- p32 keyword
Return the P32 (area of fracture per unit volume of measurement) inside the specified box.

- p33 keyword
Return the P33 (volume of fracture per unit volume of measurement) inside the specified box.

- trace-center-density
Synonym for kwd:\(P20\).

- trace-mass-density
Synonym for kwd:\(P21\).

- percolation
Synonym for

`P33`

.

Was this helpful? ... | 3DEC © 2019, Itasca | Updated: Jun 17, 2023 |