Mapping Commands from Old to New FLAC3D Syntax
This document lists commands from FLAC3D 5 (and earlier) and provides links to their FLAC3D 6 (and later) counterparts. Tip: using page search for the browser (Ctrl+F) can help locate a command quickly; the list below is extensive.
APPLY |
|
APPLY |
|
APPLY |
|
APPLY |
|
ATTACH |
|
CALL, CONFIG, CONTINUE, CYCLE, DEFINE/END, ECHO, EXIT, EXPGRID, GEOM_TEST, GUI, HEADING, HELP, IMPGRID, LOAD, MAIL, NEW, PAUSE, PLAYBACK, QUIT, RANGE, RESTORE, RETURN, SAVE, SOLVE, STEP, STOP, SYSTEM, TABLE, TITLE, TRACE, TRACK, UNDO |
|
DFN |
|
extrude |
EXTRUDE |
FISH, DEFINE |
|
FIX, FREE |
|
GENERATE |
|
GEOMETRY |
|
GP |
|
GROUP |
|
HISTORY |
|
INITIAL |
|
INTERFACE |
|
LABEL, SCALAR, TENSOR, VECTOR, TABLE |
|
LIST |
|
MODEL, PROPERTY |
|
SEL |
|
SET |
|
WATER, CONFIG, TRACK |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
:literal:` Mechanical Boundaries` |
|
APPLY daccel |
|
APPLY dvelocity |
|
APPLY ff |
|
APPLY naccel |
|
APPLY nvelocity |
|
APPLY saccel |
|
APPLY svelocity |
|
APPLY xaccel |
|
APPLY xforce |
|
APPLY xreaction |
|
APPLY xvelocity |
|
APPLY yaccel |
|
APPLY yforce |
|
APPLY yreaction |
|
APPLY yvelocity |
|
APPLY zaccel |
|
APPLY zforce |
|
APPLY zreaction |
|
APPLY zvelocity |
|
:literal:` Fluid-Flow Boundaries` |
|
APPLY pp |
|
APPLY pwell |
|
:literal:` Thermal Boundaries` |
|
APPLY psource |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
:literal:` Mechanical Boundaries` |
|
APPLY xbodyforce |
|
APPLY ybodyforce |
|
APPLY zbodyforce |
|
:literal:` Fluid-Flow Boundaries` |
|
APPLY vwell |
|
:literal:` Thermal Boundaries` |
|
APPLY vsource |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
:literal:` Mechanical Boundaries` |
|
APPLY dquiet |
|
APPLY dstress |
|
APPLY nquiet |
|
APPLY nstress |
|
APPLY squiet |
|
APPLY sstress |
|
APPLY sxx |
|
APPLY sxy |
|
APPLY sxz |
|
APPLY syy |
|
APPLY syz |
|
APPLY szz |
|
:literal:` Fluid-Flow Boundaries` |
|
APPLY discharge |
|
APPLY leakage |
|
:literal:` Thermal Boundaries` |
|
APPLY convection |
|
APPLY flux |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
APPLY remove <keyword> |
|
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
ATTACH delete |
|
:literal:` Face attachments` |
|
ATTACH angtol |
|
ATTACH nosnap |
|
ATTACH tolerance |
|
:literal:` Gridpoint attachments` |
|
ATTACH gp |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
CALL |
|
CONFIG cppfish |
|
CONFIG cppudm |
|
CONFIG creep |
|
CONFIG dynamic |
|
CONFIG fluid |
|
CONFIG thermal |
|
CONTINUE |
|
CYCLE |
|
DEFINE … END |
|
DELETE namedrange |
not supported |
DELETE track |
|
DELETE zones |
|
DOMAIN |
|
ECHO |
|
EXIT |
|
EXPGRID |
|
GEOM_TEST |
|
GUI |
|
HEADING |
|
HELP |
help |
IMPGRID |
|
LOAD |
|
NEW |
|
PAUSE |
|
PLAYBACK |
|
QUIT |
|
RANGE |
|
RESTORE |
|
RETURN |
|
SAVE |
|
SOLVE |
|
SOLVE fos |
|
STEP |
|
STOP |
|
SYSTEM |
|
TABLE |
|
TITLE |
|
TRACE |
|
TRACK |
|
UNDO |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
DFN addfracture |
|
DFN delete |
|
DFN export |
|
DFN extra |
|
DFN generate |
|
DFN gimport |
|
DFN group |
|
DFN import |
|
DFN information |
|
DFN intersection |
|
DFN property |
|
DFN setproperty |
|
DFN template |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
EXTRUDE block |
|
EXTRUDE delete |
delete is performed by object type, for instance: |
EXTRUDE edge |
|
EXTRUDE list |
list is performed by object type, for instance |
EXTRUDE metadata |
|
EXTRUDE point |
|
EXTRUDE select |
|
EXTRUDE set |
|
EXTRUDE transform |
transform is performed by object type, for instance |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
FISH create |
|
FISH debug |
|
FISH define |
|
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
FIX/FREE pp |
|
FIX/FREE temperature |
|
FIX/FREE xvelocity |
|
FIX/FREE yvelocity |
|
FIX/FREE zvelocity |
|
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
GENERATE zone brick (et al.) |
|
GENERATE zone copy |
|
GENERATE zone densify |
|
GENERATE zone extrude |
|
GENERATE zone reflect |
|
GENERATE merge |
|
GENERATE separate face |
|
GENERATE topography |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
GEOMETRY copy |
|
GEOMETRY edge |
|
GEOMETRY export |
|
GEOMETRY group |
|
GEOMETRY import |
|
GEOMETRY node |
|
GEOMETRY paint |
|
GEOMETRY polygon |
|
GEOMETRY remove |
|
GEOMETRY set |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
GP |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
GROUP zone (et al.) |
grouping is a facility (keyword) within other commands; see, for instance, |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
HISTORY add zone (et al.) |
Adding a history on an object is done through the object; for instance, |
HISTORY crtime |
|
HISTORY dytime |
|
HISTORY fltime |
|
HISTORY thtime |
|
HISTORY dt |
|
HISTORY delete |
|
HISTORY dump |
|
HISTORY hist_rep |
|
HISTORY label |
history.name a label (see |
HISTORY limits |
|
HISTORY list |
|
HISTORY ncycle |
|
HISTORY nstep |
|
HISTORY purge |
|
HISTORY reset |
|
HISTORY write |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
INITIAL biot_modulus |
|
INITIAL damping |
|
INITIAL density |
|
INITIAL displacement |
|
INITIAL fdensity |
|
INITIAL fmodulus |
|
INITIAL ftens |
|
INITIAL gpextra |
|
INITIAL position |
|
INITIAL pp |
|
INITIAL principal |
|
INITIAL saturation |
|
INITIAL smalldisp |
|
INITIAL state |
|
INITIAL stress |
|
INITIAL sxx |
|
INITIAL sxy |
|
INITIAL sxz |
|
INITIAL syy |
|
INITIAL syz |
|
INITIAL szz |
|
INITIAL temperature |
|
INITIAL velocity |
|
INITIAL xdisplacement |
|
INITIAL xposition |
|
INITIAL xsmalldisp |
|
INITIAL xvelocity |
|
INITIAL ydisplacement |
|
INITIAL yposition |
|
INITIAL ysmalldisp |
|
INITIAL yvelocity |
|
INITIAL zdisplacement |
|
INITIAL zextra |
|
INITIAL zposition |
|
INITIAL zsmalldisp |
|
INITIAL zvelocity |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
in 5.0 syntax |
in 6.0 syntax |
INTERFACE 1 ctolerance |
zone interface '1' tolerance-contact |
INTERFACE 1 delete |
zone interface '1' element delete |
INTERFACE 1 eextra |
zone interface '1' element extra |
INTERFACE 1 effective |
zone interface '1' effective |
INTERFACE 1 element |
zone interface '1' create element |
INTERFACE 1 face |
zone interface '1' create by-face |
INTERFACE 1 inistress |
zone interface '1' node initialize-stresses |
INTERFACE 1 maxedge |
zone interface '1' element maximum-edge |
INTERFACE 1 nextra |
zone interface '1' node extra |
INTERFACE 1 node |
zone interface '1' create node |
INTERFACE 1 nstress |
zone interface '1' node stress-normal-increment |
INTERFACE 1 permeability |
zone interface '1' permeability |
INTERFACE 1 property |
zone interface '1' node property |
INTERFACE 1 sheardisp |
zone interface '1' node displacement-shear |
INTERFACE 1 smalldisp |
zone interface '1' node displacement-small |
INTERFACE 1 sstress |
zone interface '1' node stress-shear |
INTERFACE 1 update |
zone interface '1' node update |
INTERFACE 1 wrap |
no translation; |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
LABEL arrow |
|
LABEL delete |
|
LABEL end |
|
LABEL text |
|
LABEL x y z |
|
the first four above optionally take an index with the “id” keyword (i.e., LABEL id 1 arrow), |
in which case the corresponding translation is |
SCALAR add |
|
TENSOR add |
|
VECTOR add |
|
for the three above, the “import”, “export”, and “remove” keywords will follow the same pattern as “add” |
with comparable translations (e.g., “SCALAR remove” will be |
TABLE |
|
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
LIST apply |
|
LIST attach |
|
LIST creep |
|
LIST dfn |
|
LIST directory |
|
LIST domain |
|
LIST dynamic |
|
LIST extrude |
|
LIST fish |
|
LIST fluid |
|
LIST fos |
|
LIST geometry |
|
LIST globals |
|
LIST gp |
|
LIST group |
|
LIST history |
|
LIST information |
|
LIST interface 1 |
zone interface "1" list (see |
LIST keyinfo |
|
LIST label |
|
LIST mechanical |
|
LIST memory |
|
LIST model |
|
LIST principal |
|
LIST profile |
|
LIST range |
|
LIST record |
|
LIST scalar |
|
LIST security |
|
LIST sel beam |
|
LIST sel cable |
|
LIST sel geogrid |
|
LIST sel liner |
|
LIST sel link |
|
LIST sel node |
|
LIST sel pile |
|
LIST sel recover |
|
LIST sel shell |
|
LIST serial |
|
LIST table 1 |
table "1" list (see |
LIST tensor |
|
LIST tetra |
|
LIST thermal |
|
LIST trace |
|
LIST track |
|
LIST vector |
|
LIST version |
|
LIST water |
|
LIST zone |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
MODEL |
|
PROPERTY |
|
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
SEL beam apply |
|
SEL beam begin … end … nseg |
|
SEL beam id |
see id keyword of |
SEL beam property |
|
SEL beamsel cid |
|
SEL beamsel id |
|
SEL beamsel nodes |
|
SEL cable begin … end … nseg |
|
SEL cable id |
see id keyword of |
SEL cable pretension |
|
SEL cable property |
|
SEL cablesel cid |
|
SEL cablesel id |
|
SEL cablesel nodes |
|
SEL delete beam |
|
SEL delete cable |
|
SEL delete geogrid |
|
SEL delete liner |
|
SEL delete link |
|
SEL delete node |
|
SEL delete pile |
|
SEL delete sel |
not supported; delete by type of structure |
SEL delete shell |
|
SEL geogrid apply |
|
SEL geogrid crossdiag |
see cross-diagonal keyword of |
SEL geogrid elemtype |
see element-type keyword of |
SEL geogrid id |
see id keyword of |
SEL geogrid internal |
see internal keyword of |
SEL geogrid property |
|
SEL geogridsel cid |
|
SEL geogridsel elemtype |
|
SEL geogridsel id |
|
SEL geogridsel nodes |
|
SEL group |
not supported, define groups by structure type (e.g., |
SEL join |
no equivalent; see |
SEL liner apply |
|
SEL liner crossdiag |
see cross-diagonal keyword of |
SEL liner elemtype |
see element-type keyword of |
SEL liner embedded |
see embedded keyword of |
SEL liner id |
see id keyword of |
SEL liner internal |
see internal keyword of |
SEL liner property |
|
SEL linersel cid |
|
SEL linersel elemtype |
|
SEL linersel id |
|
SEL linersel nodes |
|
SEL link attach |
|
SEL link constit |
|
SEL link id |
|
SEL link net |
|
SEL link target |
|
SEL node apply |
|
SEL node fix |
|
SEL node free |
|
SEL node id |
not supported (no equivalent) |
SEL node init |
|
SEL node ldamp |
|
SEL node local |
|
SEL pile apply |
|
SEL pile begin … end … nseg |
|
SEL pile id |
see id keyword of |
SEL pile property |
|
SEL pilesel cid |
|
SEL pilesel id |
|
SEL pilesel nodes |
|
SEL recover sres |
not supported, recover stress resultants by shell-type structure (e.g., |
SEL recover stress |
not supported, recover stress by shell-type structure (e.g., |
SEL recover surface |
not supported, recover surface system by shell-type structure (e.g., |
SEL refine |
not supported, refine 1d elements by type (e.g., |
SEL set damp |
|
SEL set liner |
|
SEL set link node_tol |
|
SEL set link zone_tol |
|
SEL set safety fac |
|
SEL set scale rmass |
|
SEL shell apply |
|
SEL shell crossdiag |
see cross-diagonal keyword of |
SEL shell elemtype |
see element-type keyword of |
SEL shell id |
see id keyword of |
SEL shell internal |
see internal keyword of |
SEL shell property |
|
SEL shellsel cid |
|
SEL shellsel elemtype |
|
SEL shellsel id |
|
SEL shellsel nodes |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
SET case_sensitivity |
not supported; case sensitivity may no longer be turned on |
SET creep |
|
SET cust1 |
|
SET cust2 |
|
SET deterministic |
|
SET directory |
|
SET display |
|
SET dynamic |
|
SET echo |
|
SET fish |
see all fish commands (e.g., |
SET fluid |
|
SET geom_rep |
|
SET geometry |
|
SET gravity |
|
SET hist_rep |
|
SET large |
|
SET log |
|
SET logfile |
|
SET mechanical |
|
SET ncycle |
|
SET nmd |
|
SET notice |
|
SET nstep |
|
SET pagination |
|
SET plotinterval |
|
SET processors |
|
SET random |
|
SET ratio |
|
SET safe_conversion |
not supported; safe conversion may no longer be turned off |
SET small |
|
SET thermal |
|
SET trace_rep |
|
SET track |
|
SET warning |
|
CONFIG cppfish |
|
CONFIG cppudm |
|
CONFIG creep |
|
CONFIG dynamic |
|
CONFIG fluid |
|
CONFIG thermal |
FLAC3D 5.0 |
FLAC3D 6.0 |
---|---|
WATER calc_pp |
|
WATER density |
|
WATER no_pp |
|
WATER set |
|
WATER table |
|
CONFIG fluid |
|
TRACK |
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |