### FLAC2D

See also: FISH Tutorial

On This Page

Tutorials Example Applications Verification Problems

On FLAC Examples Index

Examples listed on this page are of three types: Tutorials, Example Applications, and Verification Problems. *Every* FLAC example available in this documentation is found in the comprehensive examples index.[1]

See also: FISH Tutorial

See also: FISH Tutorial

Tutorials are the optimal starting point for new users who want to work with the program right away. They present step-by-step instructions for working through the problems illustrated, and are listed above in the recommended order of engagement.

- Undrained Cylindrical Cavity Expansion in a Cam-Clay Medium
- Wharf Subjected to Earthquake Loading
- Simulation of Pull-Tests for Fully Bonded Rock Reinforcement
- Slope Stability for a Cohesive and Frictional Soil
- Axisymmetric Modeling of Post-Pillar Mining
- Cemented Backfill Pillar Performance
- Post-peak Pillar Behavior and the Effects of Backfill Confinement
- Full-Scale Test Wall in Sand
- Stresses around a Pressurized Concrete Tunnel
- Analysis of a Concrete Diaphragm Wall
- Multistage Tunnel Excavation and Support
- Pile-Supported Highway Embankment
- Fluid Flow Towards a Tunnel

- Undrained Cylindrical Cavity Expansion in a Cam-Clay Medium
- Wharf Subjected to Earthquake Loading
- Simulation of Pull-Tests for Fully Bonded Rock Reinforcement
- Influence of Slope Curvature on Stability
- Pillar Loads at Intersecting Tunnels
- Excavation in a Saturated Soil
- One-Dimensional Consolidation Considering Secondary Compression
- Excavation and Support of a Shallow Tunnel
- Grid Generation for Intersecting Tunnels
- Pressurized Cylindrical Cavern
- Prediction of Borehole Closure in a Salt Formation
- Axial and Lateral Loading of a Concrete Pile
- Wheel Load over a Buried Pipe
- Embankment Loading on a Cam-Clay Foundation
- Impermeable Concrete Caisson Wall with Pretensioned Tiebacks
- Dewatered Construction of a Braced Excavation
- Installation of a Triple-Anchored Excavation Wall
- Reinforced Tunnel Excavation
- Subsidence above Horizontal Cut
- Tunnel in a Jointed Anisotropic Elastic Material
- Valley Creep Deformation
- Sleeved Triaxial Test of a Bonded Material
- Open Pit Mine with Faults

The example applications are problems that have been solved using FLAC2D and FLAC3D, demonstrating the various classes of problems to which the programs may be applied.

For a comprehensive list of all FLAC examples that appear in this documentation, refer to FLAC Examples Index.

The problems in this group represent only a sample of potential applications for FLAC. The examples presented to users are updated on a regular basis. Users are invited to submit their own examples for inclusion, or to communicate or request any type of problem that they would like to see included here.

- Smooth Circular Footing on an Associated Mohr-Coulomb Material
- Cylindrical Hole in an Infinite Hoek-Brown Medium
- Cylindrical Hole in an Infinite Mohr-Coulomb Material
- Rough Strip Footing on a Cohesive Frictionless Material
- Uniaxial Compressive Strength of a Jointed Material Sample
- Plastic Flow in a Punch Problem
- Brazilian Test
- Poroelastic Response of a Borehole (FLAC2D)
- Unconfined Flow Toward a Riverbank (FLAC2D)
- Undrained Embankment Loading (FLAC2D)

- Smooth Circular Footing on an Associated Mohr-Coulomb Material
- Cylindrical Hole in an Infinite Hoek-Brown Medium
- Cylindrical Hole in an Infinite Mohr-Coulomb Material
- Rough Strip Footing on a Cohesive Frictionless Material
- Uniaxial Compressive Strength of a Jointed Material Sample
- Borehole Behavior in Elastic Anisotropic Materials
- Smooth Square Footing on a Cohesive Frictionless Material
- Drained and Undrained Triaxial Compression Test on a Cam-Clay Sample
- Free Vibration of a Cantilever Beam
- Simple Slope in Hoek-Brown Material
- Brazilian Test

The verification problems are tests in which the FLAC solution is compared directly to an analytical (i.e., closed-form) solution. Verification problems for the optional features – thermal analysis, creep material models and dynamic analysis – and for structural elements are found in the sections of the documentation covering those topics.

See Also

Endnote

Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |